AMSOIL Shipping Information
Online StoreAMSOIL Preferred Customer ProgramAMSOIL Business AccountsAMSOIL Dealership OpportunityOrder FREE AMSOIL Product CatalogContact Us
Email Price List

2010 Volvo S40 OilsR.Us - Only the Best!



Oils & FiltersMaintenance ScheduleService BulletinRecallsImages
2010 Volvo S40
2.4L 5-cyl Engine Code B5244S7 Engine Code B5244S7
168 bhp. @ 6000 rpm / Torque: 170 ft. lbs. @ 4400 rpm
20 Valves Double Overhead Camshaft Variable Valve Timing
2.4L - Inline 5-cyl (2435 cc) Code: B5244S4 (Gasoline)
Compression Ratio: 10.3:1

We know your Volvo S40
& We offer the world's best oils, filters & more!

AMSOIL manufacture's the world's best synthetic lubricant's & filters since 1972. AMSOIL also offers substitute brands such as WIX, Mann & Donaldson making us your one-stop shop for all automotive maintenance needs.

How do I use this Product Cross Reference Guide?

Product Cross Reference Guide: This product cross reference guide follows recommendations outlined in your owners manual and also reflects periodic service recommendation updates from the original equipment manufacturer for this particular model (2010 Volvo S40 with engine code B5244S7) show example...

For example, the manufacturer may have recommended 5W30 motor oil at the time of production (owners manual) & later revised the recommendation to 5W20. This guide will reflect latest recommendation by the manufacturer for this model. If there are no special instructions from the manufacturer, the owner can choose to follow either one of the recommendation without voiding warranty hide example.

Optional Equipment Listing This guide lists all available equipment options such as transmission options, differentials etc. for 2010 Volvo S40 with engine code B5244S7 hide.
Product Availability Listing This guide lists all available AMSOIL & substitute brand products that meet or exceed OEM (Volvo) recommendation for each equipment. Any one of the recommended product can be used. One may be better than the other, you can review product details & price or contact us to ask our opinion pertaining to your usage and preference hide.
Operating Temperature Original equipment manufacturer (OEM) sometimes provide different product recommendations based on operating environment temperature for a given equipment. This product cross reference guide will list such recommendations based on OEM guidelines. Some OEM recommended viscosity pertaining to a specific temperature range may not be available from AMSOIL.

However, AMSOIL products recommended for another temperature range can be safely used because AMSOIL synthetic lubricants are engineered to provide exceptional performance for significantly broader temperature range when compared to conventional & or other brand synthetic oils. For more information on a lubricants cold temperature performance; please refer to "Pour Point" from "Technical Properties" table located at the bottom of each lubricant product page hide.
Last Updated This product cross reference guide for 2010 Volvo S40 engine code B5244S7 was last updated on 11th November 2019 hide.
Wholesale Accounts      Shipping Information Page
  1. Engine Oil

    Grade 1  »  API*
    -13 To 104 F  »  5W-40
    -31 To 104 F  »  5W-30 [1]
    Below 104 F  »  0W-30, 0W-40 [2]
  2. Manual Transmission

    Manual Transmission, M56 (5-SPD)  »  SL019

    All TEMPS  » 
    No AMSOIL Product Recommendation
  3. Automatic Transmission

  4. Power Steering Fluid

    Power Steering Fluid  »  PS006

    Power Steering Fluid (PSFCN) [6]
  5. Brake Fluid

    Brake Fluid  »  HBH

    DOT 3 and 4 Brake Fluid (BFLVCN) [5]
  6. Clutch Fluid

    Clutch Fluid  »  HBH

    DOT 3 and 4 Brake Fluid (BFLVCN) [4]
  7. Lubricants & Fluids Comments  »  [*]

    [1] SAE 5W-30 is preferred.
    [2] Synthetic SAE 0W-30, 5W-30 or 0W-40 oils are recommended
    for driving in extreme temperatures (hot or cold), when
    towing a trailer over long distances, and when driving in
    mountainous areas.
    [3] Use JWS3309, Volvo P/N 1161 540
    [4] Hydraulic Brake Fluid, DOT 4
    [5] Hydraulic Brake Fluid DOT 4, Volvo P/N 9437 433
    [6] Original recommendation of P/N 1161529 (Pentosin CHF 11S)
    has been superseded with P/N 30741424 (Pentosin CHF 202)

  8. Fluid Capacities (drive train fluids)

    Engine, with filter  »  6.1 quarts [1]
    Cooling System, With ATXL Initial Fill  »  10.6 quarts
    Passenger Car & Light Truck Antifreeze & Coolant
    AMSOIL Antifreeze and Engine Coolant
    Cooling System, With MTXL Initial Fill  »  10 quarts
    Passenger Car & Light Truck Antifreeze & Coolant
    AMSOIL Antifreeze and Engine Coolant
    Automatic Transmission, AW55-51 Initial Fill  »  Not Specified
    Automatic Transmission, Total Fill
    5 speed AW55-51  »  8.1 quarts
    Manual Transmission, M56 (5-SPD)  »  4.4 pints
    ANTPC ANT ANTPC ANT
    Capacities Comments
    [1] After refill check oil level.
  9. Chassis Lubrication

    0 Fittings, 0 Plugs
  10. Torque Specifications

    Oil Drain Plug  »  28 ft/lbs
    Manual Transmission M56 (5-SPD)
    Fill Plug 27 ft/lbs
    Drain Plug 27 ft/lbs

Close Panels

  1. Filters: Oil, Air, Cabin, Fuel, Transmission, Hydraulic & Crankcase

    Oil Filter MANN Oil Filter (HU7198X)  
    Oil Filter WIX 57186 Oil Filter [1]
    Air Filter MANN Air Filter (C241371)  
    Air Filter WIX 46938 Air Filter  
    Cabin Air Filter WIX 24688 Cabin Air Filter [2]

    Filter Comments
    [1] Manufacturer OE Recommended Oil Change Intervals
    [2] Particulate
  2. Gasoline Engine Fuel Additives

    Dominator Octane Boost (AOB)
    AOBDominator Octane Boost (AOB)

    Maximizes power and improves performance in all two-cycle and four-cycle gasoline engines. Reduces engine knock, improves ignition and engine response, helps fuel burn cleaner and inhibits corrosion. Recommended for off-road and racing use. Packag...

    Gasoline Stabilizer (AST)
    ASTGasoline Stabilizer (AST)

    AMSOIL Gasoline Stabilizer (AST) reduces the oxidation process that occurs when fuel is stored for extended periods, improving performance, extending equipment life and decreasing maintenance expenses. Package sizes include: 16-oz. Bottle ...

    P.I Performance Improver (API)
    APIP.I Performance Improver (API)

    P.i. improves fuel mileage an average of 2.3% and up to 5.7%. Reduces emissions such as hydrocarbons (HC) up to 15%, carbon monoxide (CO) up to 26% and nitrous oxides (NOx) up to 17%. Restores power and performance. Reduces the need for costly higher...

Close Panels

ASL5W-30 Signature Series Synthetic Motor Oil (ASL)

The Top Tier of AMSOIL Synthetic Motor Oil. AMSOIL Signature Series Synthetic Motor Oil delivers extraordinary lubrication in all types of automotive gasoline engines. Engineered for enthusiasts seeking maximum protection and performance. Precision-f...
XLF5W-30 Extended Life Synthetic Motor Oil (XLF)

AMSOIL XL Synthetic Motor Oil is the choice for those who want to do something extra for their vehicle. Its boosted formulation delivers extra cleaning power, outstanding wear control, excellent high and low temperature protection and exceptional fue...
OEF5W-30 OE Series Synthetic Motor Oil (OEF)

OE Synthetic Motor Oil is for mechanics and drivers seeking peace of mind protection and exceptional value in synthetic motor oil. It delivers 100 percent synthetic engine protection for advanced automotive technology, including turbochargers and dir...
ATFSignature Series Multi-Vehicle Synthetic ATF

AMSOIL Signature Series Multi-Vehicle Synthetic ATF is engineered to outperform conventional automatic transmission fluids and exceed the performance requirements of most North American, European and Asian vehicles. This sophisticated formulation pro...
OTFOE Multi-Vehicle Synthetic ATF

AMSOIL OE Synthetic Automatic Transmission Fluid provides passenger-car/light-truck transmissions excellent wear protection, sludge resistance and extreme-temperature performance throughout original equipment manufacturer (OEM)-recommended drain inte...
BFLVDOT 3 and 4 Synthetic Brake Fluid (BFLV)

*** This item is available for US customers only *** Brake fluid acts as a hydraulic fluid, transferring power and lubricating brake system components while also preventing corrosion. It must contend with extreme heat and the inevitable moi...
PSFMulti-Vehicle Synthetic Power Steering Fluid (PSF)

AMSOIL Multi-Vehicle Synthetic Power Steering Fluid provides excellent wear protection. Its synthetic formulation delivers better lubricity and reduced friction, resulting in cooler operating temperatures, longer component life and quieter operation....
ANTPCPassenger Vehicle Antifreeze (ANTPC)

Ethylene Glycol 50/50 Pre-Mix Formulation AMSOIL Passenger Car/Light Truck Antifreeze & Coolant provides superior heat transfer and excellent protection against corrosion, freezing and boilover. It provides maximum protection in extreme temper...
ANTAntifreeze and Engine Coolant (ANT)

AMSOIL Antifreeze & Coolant (ANT) is a low-toxicity propylene glycol antifreeze formulated to provide benefits far beyond those found in today's conventional antifreeze and coolant products. This revolutionary formulation provides maximum antifre...
mann oil filterMANN-FILTERS Oil Filters

Oil filters from MANN-FILTER purify oil of dirt and solid particles such as dust, abraded metal, carbon deposits and soot particles. The filter housing is pressure-resistant, protected against corrosion and features a long-life elastomer seal. Use Part Number drop down to select filter.
mann air filterMANN-FILTERS Air Filters

MANN-FILTER air filters feature optimum pleat geometry for maximum dirt holding capacity and high filtration efficiency for engine protection. They also correct air flow, enhancing engine protection.

Maintenance Schedule as Provided by OEM Documentation

Distance:
7,500 miles (12,000 km)
Action:
Inspect
Item:
Coolant
Interval in Month(s):
12
Labor Units:
0.02
Parts Units:
0
Drive Type:
ALL
Description: Also known as "antifreeze." A mixture of water and ethylene glycol that has both a higher boiling point and a lower freezing point than plain water.
Distance:
7,500 miles (12,000 km)
Action:
Inspect/replace
Item:
Brake pads
Interval in Month(s):
Labor Units:
0.15
Parts Units:
0
Drive Type:
ALL
Description: High-friction material attached to a metal backing plate.
Distance:
7,500 miles (12,000 km)
Action:
Inspect & adjust air pressure
Item:
Wheels & tires
Interval in Month(s):
12
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A circular frame of hard material that may be solid or partly solid, is capable of turning on an axle, and holds the rubber cushion that contains compressed air.
Distance:
7,500 miles (12,000 km)
Action:
Reset
Item:
Service reminder light
Interval in Month(s):
12
Labor Units:
0.02
Parts Units:
0
Drive Type:
ALL
Description: A light that indicates that general vehicle maintenance is needed or that a specific service is required.
Distance:
7,500 miles (12,000 km)
Action:
Check level
Item:
Power steering fluid
Interval in Month(s):
24
Labor Units:
0.02
Parts Units:
0
Drive Type:
ALL
Description: Hydraulic fluid used in a power steering system.
Distance:
7,500 miles (12,000 km)
Action:
Inspect
Item:
Brake fluid
Interval in Month(s):
24
Labor Units:
0.02
Parts Units:
0
Drive Type:
ALL
Description: The fluid used in the hydraulic brake system.
Distance:
7,500 miles (12,000 km)
Action:
Inspect
Item:
Windshield wipers & washer
Interval in Month(s):
24
Labor Units:
0.02
Parts Units:
0
Drive Type:
ALL
Description: Motorized mechanical arms with rubber inserts used to wipe the windshield or back glass. A small pump and reservoir that can direct a jet of cleaning solution at the windshield or back glass.
Distance:
7,500 miles (12,000 km)
Action:
Inspect/adjust
Item:
On-board diagnosis system
Interval in Month(s):
24
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A computer-controlled system that identifies malfunctioning or out-of-adjustment components under its control through the display of trouble codes. The presence of trouble codes is usually indicated by an intermittently or constantly lit "check engine " or "service engine soon" light.
Distance:
7,500 miles (12,000 km)
Action:
Change
Item:
Engine oil
Interval in Month(s):
12
Labor Units:
0.24
Parts Units:
6.1
Drive Type:
ALL
Description: A substance that lubricates and cools the moving parts of the engine and reduces corrosion and the formation of rust.
Distance:
7,500 miles (12,000 km)
Action:
Replace
Item:
Oil filter
Interval in Month(s):
12
Labor Units:
0.1
Parts Units:
1
Drive Type:
ALL
Description: A cartridge-filled canister placed in an engine's lubricating system to strain dirt and abrasive materials out of the oil.
Distance:
15,000 miles (24,000 km)
Action:
Inspect/adjust
Item:
Parking brake
Interval in Month(s):
24
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: The mechanical brake connected by cables to either a ratcheting hand lever or foot pedal used to hold or apply a vehicle's rear and sometimes front brakes while left unattended or under conditions of hydraulic circuit failure. Sometimes referred to as the emergency brake.
Distance:
15,000 miles (24,000 km)
Action:
Inspect
Item:
Bevel gear
Interval in Month(s):
132
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: In differential drives, the bevel gear transmits power to two axles spinning at different speeds
Distance:
15,000 miles (24,000 km)
Action:
Replace
Item:
Cabin air filter
Interval in Month(s):
48
Labor Units:
0.05
Parts Units:
1
Drive Type:
ALL
Description: A filtering system that meters out pollen, road dust and other particles before they can reach the passenger cabin.
Distance:
30,000 miles (48,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
30,000 miles (48,000 km)
Action:
Inspect
Item:
Fuel lines & hoses
Interval in Month(s):
24
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: The tubing that carries fuel throughout a vehicle.
Distance:
30,000 miles (48,000 km)
Action:
Inspect
Item:
Brake lines, hoses & connections
Interval in Month(s):
48
Labor Units:
0.02
Parts Units:
0
Drive Type:
ALL
Description: Tubes and their connections that carry brake fluid between the various components in a vehicle's brake system.
Distance:
37,500 miles (60,000 km)
Action:
Replace
Item:
Air filter
Interval in Month(s):
48
Labor Units:
0.2
Parts Units:
1
Drive Type:
ALL
Description: A device that filters incoming air fed to the engine.
Distance:
37,500 miles (60,000 km)
Action:
Flush/replace
Item:
Brake fluid
Interval in Month(s):
48
Labor Units:
0.7
Parts Units:
1.2
Drive Type:
ALL
Description: The fluid used in the hydraulic brake system.
Distance:
45,000 miles (72,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
52,500 miles (84,000 km)
Action:
Change
Item:
Automatic transmission fluid
Interval in Month(s):
84
Labor Units:
0.5
Parts Units:
8.2
Drive Type:
ALL
Description: The fluid used for lubricating and cooling an automatic transmission.
Distance:
60,000 miles (96,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
96
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
60,000 miles (96,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
144
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
60,000 miles (96,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
180
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
67,500 miles (108,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
120
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
67,500 miles (108,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
132
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
67,500 miles (108,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
156
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
75,000 miles (120,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
75,000 miles (120,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
108
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
75,000 miles (120,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
120
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
75,000 miles (120,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
228
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
75,000 miles (120,000 km)
Action:
Replace
Item:
Spark plugs
Interval in Month(s):
48
Labor Units:
0.6
Parts Units:
5
Drive Type:
ALL
Description: Cables that carry a high-voltage electrical charge from the distributor cap or ignition coils to the spark plugs.
Distance:
82,500 miles (132,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
168
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
82,500 miles (132,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
168
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
82,500 miles (132,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
180
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
90,000 miles (144,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
156
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
90,000 miles (144,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
156
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
90,000 miles (144,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
204
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
97,500 miles (156,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
156
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
97,500 miles (156,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
192
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
97,500 miles (156,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
204
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
105,000 miles (168,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
105,000 miles (168,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
132
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
105,000 miles (168,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
168
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
105,000 miles (168,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
240
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
112,500 miles (180,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
108
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
112,500 miles (180,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
144
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
112,500 miles (180,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
168
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
120,000 miles (192,000 km)
Action:
Replace
Item:
Serpentine belt
Interval in Month(s):
168
Labor Units:
0.5
Parts Units:
1
Drive Type:
ALL
Description: A ribbed drive belt that drives more than one engine accessory.
Distance:
120,000 miles (192,000 km)
Action:
Replace
Item:
Idler pulley
Interval in Month(s):
168
Labor Units:
0.2
Parts Units:
1
Drive Type:
ALL
Description: A guide or tightening pulley for a belt or chain.
Distance:
120,000 miles (192,000 km)
Action:
Replace
Item:
Timing belt
Interval in Month(s):
168
Labor Units:
3.4
Parts Units:
1
Drive Type:
ALL
Description: A "toothed" belt that drives an overhead camshaft or camshafts (and in some vehicles a water pump).
Distance:
120,000 miles (192,000 km)
Action:
Replace
Item:
Timing belt tensioner
Interval in Month(s):
168
Labor Units:
0.2
Parts Units:
1
Drive Type:
ALL
Description: A spring-loaded idler wheel that automatically keeps the timing belt under enough tension to prevent the timing belt from allowing the camshaft(s) it controls to go out of sync.
Distance:
127,500 miles (204,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
96
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
127,500 miles (204,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
120
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
127,500 miles (204,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
192
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
135,000 miles (216,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
135,000 miles (216,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
108
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
135,000 miles (216,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
180
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
135,000 miles (216,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
204
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
142,500 miles (228,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
96
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
142,500 miles (228,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
132
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
142,500 miles (228,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
228
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
150,000 miles (240,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
132
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
150,000 miles (240,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
192
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
150,000 miles (240,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
228
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
157,500 miles (252,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
96
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
157,500 miles (252,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
180
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
157,500 miles (252,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
228
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
165,000 miles (264,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
165,000 miles (264,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
120
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
165,000 miles (264,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
192
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
165,000 miles (264,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
240
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
172,500 miles (276,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
108
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
172,500 miles (276,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
144
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
172,500 miles (276,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
216
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
187,500 miles (300,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
192
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
187,500 miles (300,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
204
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
187,500 miles (300,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
216
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
195,000 miles (312,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
195,000 miles (312,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
96
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
195,000 miles (312,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
168
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
195,000 miles (312,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
216
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
202,500 miles (324,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
132
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
202,500 miles (324,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
228
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
202,500 miles (324,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
240
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
210,000 miles (336,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
156
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
210,000 miles (336,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
192
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
210,000 miles (336,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
240
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
217,500 miles (348,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
204
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
217,500 miles (348,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
216
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
217,500 miles (348,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
228
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
225,000 miles (360,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
225,000 miles (360,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
144
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
225,000 miles (360,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
216
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
225,000 miles (360,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
216
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
232,500 miles (372,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
108
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
232,500 miles (372,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
144
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
232,500 miles (372,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
144
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
247,500 miles (396,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
108
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
247,500 miles (396,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
120
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
247,500 miles (396,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
132
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
255,000 miles (408,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
255,000 miles (408,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
108
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
255,000 miles (408,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
120
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
255,000 miles (408,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
132
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
262,500 miles (420,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
108
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
262,500 miles (420,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
120
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
262,500 miles (420,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
132
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
270,000 miles (432,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
108
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
270,000 miles (432,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
120
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
270,000 miles (432,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
132
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
277,500 miles (444,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
108
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
277,500 miles (444,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
120
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
277,500 miles (444,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
132
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
285,000 miles (456,000 km)
Action:
Inspect
Item:
Battery
Interval in Month(s):
12
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: A box containing lead plates filled with a water and acid mixture that stores electricity generated by the alternator. It is the source of power for parts of the car that operate on electricity.
Distance:
285,000 miles (456,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
108
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
285,000 miles (456,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
120
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
285,000 miles (456,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
132
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.
Distance:
292,500 miles (468,000 km)
Action:
Inspect boots & seals
Item:
Drive shaft, pilot bearing & u-joints
Interval in Month(s):
108
Labor Units:
0.2
Parts Units:
0
Drive Type:
ALL
Description: In a rear- or four-wheel drive vehicle, the drive shaft is a sturdy metal tube with flexible joints on either end that connects the source of power to a differential. The pilot bearing is a bearing press-fit into the rear of the crankshaft that supports the tip of the transmission input shaft. It should be routinely replaced whenever the clutch is replaced as this is when it's most accessible.
Distance:
292,500 miles (468,000 km)
Action:
Inspect
Item:
Steering & suspension
Interval in Month(s):
120
Labor Units:
0.1
Parts Units:
0
Drive Type:
ALL
Description: A vehicle's steering is the collection of components that enable the operator to direct a vehicle in a desired direction. Suspension is the assemblage of joints, links and other components between a vehicle and its wheels.
Distance:
292,500 miles (468,000 km)
Action:
Inspect
Item:
Exhaust system
Interval in Month(s):
132
Labor Units:
0.05
Parts Units:
0
Drive Type:
ALL
Description: A system of tubing that routes exhaust gases from the exhaust manifold to the rear of the car and into the air. The exhaust system includes catalytic converters and mufflers that help reduce air and noise pollution generated by an engine.

Service Bulletin as Provided by OEM & NHTSA

Bulletin Date:
2010-06-01
Bulletin Number:
TJ-22815
NHTSA Item Number:
10033968

Component Description: Power train:manual transmission.

Service Bulletin Summary: Volvo: recall 227-m66, not possible to engage, disengage, or shift gears. It has been decided to conduct a voluntary safety recall on certain model vehicles equipped with m66 manual 6 speed transmissions due to the gearshift lever stud as ( nhtsa item number - 10033968 ).

Bulletin Date:
2010-10-01
Bulletin Number:
TJ-10438-8
NHTSA Item Number:
10037240

Component Description: (A) Service brakes, air:antilock:abs warning light., (B) Service brakes, hydraulic:antilock:abs warning light.

Service Bulletin Summary: Volvo: the abs light is on with four possible toruble codes. ( nhtsa item number - 10037240 ).

Bulletin Date:
2010-12-01
Bulletin Number:
TJ-21297-2
NHTSA Item Number:
10037819

Component Description: Equipment:electrical.

Service Bulletin Summary: Volvo: when a trailer is attached that has led lights there may be a lighting problem. ( nhtsa item number - 10037819 ).

Bulletin Date:
2010-12-01
Bulletin Number:
TJ-18381-7
NHTSA Item Number:
10037821

Component Description: Suspension:front:springs:coil springs.

Service Bulletin Summary: Volvo: when going over bumps or on an uneven road there may be a knocking or rattling noise from the front struts. There may be a defective top bearing or a coil spring in conflict with the body strut tower. ( nhtsa item number - 10037821 ).

Bulletin Date:
2011-01-01
Bulletin Number:
US22495
NHTSA Item Number:
10037900

Component Description: Engine and engine cooling.

Service Bulletin Summary: Volvo: the procedure if there is an oil leak coming from the angle gear fill plug. ( nhtsa item number - 10037900 ).

Bulletin Date:
2012-01-01
Bulletin Number:
SMB 23-037
NHTSA Item Number:
10043544

Component Description: Fuel system, gasoline:delivery:fuel pump.

Service Bulletin Summary: Pump electronic modules (pem) to prior approval. ( nhtsa item number - 10043544 ).

Bulletin Date:
2012-04-01
Bulletin Number:
US15309.4.1
NHTSA Item Number:
10044085

Component Description: Tires.

Service Bulletin Summary: Volvo: excessively negative rear camber may cause uneven tire wear and this may be accompanied by abnormal road noise or ride. Refer to the camber angle specification in rtj 19674. Also included models s40,c30, and v50 model year 2012. ( nhtsa item number - 10044085 ).

Bulletin Date:
2012-04-01
Bulletin Number:
TJ-24643.1.5
NHTSA Item Number:
10044146

Component Description: Engine and engine cooling:exhaust system.

Service Bulletin Summary: Volvo: test message in driver information module (dim) regarding low level of oil, or yellow warning symbol. ( nhtsa item number - 10044146 ).

Bulletin Date:
2013-09-01
Bulletin Number:
TJ-27818
NHTSA Item Number:
10054529

Component Description: Fuel system, gasoline:storage:tank assembly.

Service Bulletin Summary: Volvo: information being provided regarding the replacement and installation of steel fuel tank on some vehicles. Model 2005-2010 s40, v50. ( nhtsa item number - 10054529 ).

Bulletin Date:
2014-08-01
Bulletin Number:
TJ-25329
NHTSA Item Number:
10056174

Component Description: (A) Steering:linkages:knuckle:spindle:arm., (B) Wheels:cap/cover/hub.

Service Bulletin Summary: Volvo: on some vehicles, the steering knuckle would have wheel hub displaced and would to replace wheel hub. ( nhtsa item number - 10056174 ).


Recall Data Provided by NHTSA

#
1
Make(s):
VOLVO
Model(s):
C30, S40N, V50
Year(s):
2010, 2011
Manufacturer:
VOLVO CARS OF N.A. LLC.
NHTSA ID:
10V255000
Recall Date:
June 8th, 2010
Units Affected:
536

Affected Component: Steering:gear box:shaft sector.

Summary: Volvo is recalling certain model year 2010-2011 c30, model year 2010 s40 and v50 vehicles equipped with 6 speed manual transmissions. The gearshift lever stud assembly may not have been tightened to the correct specification during assembly. If the gearshift lever cable or stud assembly becomes loose, it may not be possible to engage, disengage or shift gears. .

Conequence: This condition can increase the risk of a vehicle crash. .

Remedy: Dealers will torque the gearshift lever stud assembly to the correct specification free of charge. The safety recall began on june 14, 2010. Owners may contact volvo at 1-800-458-1552 or customercare@volvoforlife. Com. .

Notes: Volvo safety recall no. R227. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153).

#
2
Make(s):
VOLVO
Model(s):
C30, C70, S40, S60, S80, V50, V70, XC70, XC90
Year(s):
2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Manufacturer:
VOLVO CARS OF N.A. LLC.
NHTSA ID:
10V566000
Recall Date:
November 8th, 2010
Units Affected:
416

Affected Component: Equipment:electrical:navigational system(global positioning system).

Summary: Volvo is recalling certain vehicles equipped with garmin 760 portable global positioning system (gps) units because the batteries on those units may overheat. .

Conequence: An overheated battery could lead to a fire. .

Remedy: Volvo advises owners to please stop using the garmin portable gps device immediately, and visit the garmin website to determine if their unit is affected. The unit's battery will be replaced with a new battery and a spacer will be inserted on top of the battery next to the pcb. This service will be performed free of charge. The safety recall began on november 18, 2010. Owners may contact garmin at 866-957-1981 or visit garmin's website at www. Garmin. Com/nuvibatterypcbrecall. .

Notes: Volvo safety recall no. R231. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153).

#
3
Make(s):
VOLVO
Model(s):
S40, S60, V50, XC60
Year(s):
2009, 2010, 2011
Manufacturer:
VOLVO CARS OF N.A. LLC.
NHTSA ID:
10V591000
Recall Date:
November 22nd, 2010
Units Affected:
7,420

Affected Component: Seats.

Summary: Volvo is recalling certain passenger vehicles equipped with power front passenger seats. The front seat rail's detection system was manufactured incorrectly and may permit the passenger to forward the seat beyond the intended maximum. .

Conequence: Positioning of the seat beyond the intended maximum can cause increased risk of injury to the passenger in the event of a crash. .

Remedy: Dealers will inspect the front power seat stops for both front seats for the presence of an "end stop" and repair the vehicles as necessary free of charge. The safety recall began on december 23, 2010. Owners may contact volvo at 1-800-458-1552 or at customercare@volvoforlife. Com. .

Notes: Volvo safety recall no. R235. Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (tty 1-800-424-9153).

Rating & Review Section


Was this page helpful?

(click on a star to rate)

Blog Title: 2010 Volvo S40 (2.4L-B5244S7) OilsR.Us - World's Best Oils & Filters
Current Rating: 4.5 out of 5 stars
Votes & Reviews: 1 vote(s) and 1 user reviews.


Post your comments
or ask a question


smaller | bigger

1-800-615-3709

Price List Request

Receive wholesale price list in your email.